939005279 - 1076A72 HEAT SHIELD FOR RIGHT CATALYTIC PRECONVERTER - R.R.

Removing ( Refitting )     Op. 1076B82 LEFT EXHASUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER - R.R.    Op. 1076B84 RIGHT EXHAUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER - R.R.    Op. 4130A14 POWER STEERING BOX COVER - R R     Op. 1072B50 AIR CHAMBER - R.R.    Op. 1016A34 RIGHT TAPPET COVER - R + R AND REPLACE GASKET    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE 1. Undo the nut (1a) fixing the heat shield (1b) to the catalytic preconverter.2. Open the clip and move the Lambda sensor wiring to one side. 1. Undo the upper fixing nuts and remove the heat shield. Refitting ( Removing ) - Place the heat shield back in its housing and secure it using the nuts.- Place the electrical wiring for the Lambda sensor in position and fasten it with the clip.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1016A34 RIGHT TAPPET COVER - R + R AND REPLACE GASKET    Op. 1072B50 AIR CHAMBER - R.R.    Op. 4130A14 POWER STEERING BOX COVER - R R     Op. 1076B84 RIGHT EXHAUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER - R.R.    Op. 1076B82 LEFT EXHASUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER - R.R.