939005318 - 2720D18 DIFFERENTIAL SIDE CONSTANT VELOCITY JOINT (ONE), LEFT OR RIGHT - R.R. WITH DRIVESHAFT REMOVED - INCLUDES BOOT REPLACEMENT

Removing ( Refitting ) - Position the rear driveshaft in a vice fitted with protective jaws.1. Remove the protective boot retaining bands.2. Retract the protective boot to uncover the joint.- Remove the grease from the joint. 1. Remove the circlip (1a) and release the differential internal driveshaft (1b) from the bearing. 1. Remove the bearing circlip.2. Using a suitable drift (2a) and mallet, remove the bearing (2b) from the driveshaft.- Remove the boot from the driveshaft. Refitting ( Removing ) - Wash the constant velocity joint components thoroughly using diesel oil or petrol and visually inspect that there are no signs of seizing or grooves on the balls or seats.- Position the new protective boot on the driveshaft.- Fit the bearing for the joint in its housing and secure it using a new circlilp.- Fill the differential internal driveshaft and the protective boot with the recommended grease.

Component	Type	Description	Classification	Qty.	Validity
Differential side constant velocity joint	Grease (g)	TUTELA MRM ZERO	NLGI 0	70	3.2 JTS

- Place the differential internal driveshaft in position and secure it using the new circlip.- Place the new protective boot in its housing and secure it to the driveshaft using the new band.- Fit a new band securing the protective boot to the differential internal driveshaft using the recommended tool.

Tool	Description	Function	Validity
2000006300	Caliper	Removing/ refitting driveshaft hoods

- Remove the rear driveshaft from the vice.