1088B20 ENGINE COOLING RADIATOR - R + R - Alfa - 159 - eLearn

939010670 - 1088B20 ENGINE COOLING RADIATOR - R + R

) Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 7210E10 R.R. FRONT BUMPER Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER Op. 0010T20 ENGINE COOLANT - CHANGE 1. Undo the nuts and remove the heat shields for the fan motors.2. Disconnect the fan electrical connections.

	Description	Connector
2	Engine fan motor -1	See N011 FAN MOTOR

	Description	Connector
2	Engine fan motor -2	See N012 ENGINE FAN MOTOR - 2

3. Disconnect the electrical connections for the dimmers.

	Description	Connector
3	Engine fan adjustment resistance - 1	See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1

	Description	Connector
3	Engine fan adjustment resistance -2	See O012 ENGINE FAN 2 ADJUSTMENT RESISTANCE

1. Disconnect the rapid connector for the radiator coolant outlet hose, radiator side.

1. Disconnect the rapid connector for the radiator coolant inlet hose, radiator side.

1. Undo the lower bolt (1a) and remove the cold air intake (1b) working on the air filter casing clips.

1. Undo the bolts (1a) and remove the air duct (1b).

1. Undo the bolts (1a) for the air conditioning system condenser (1b).- Remove the air conditioning system condenser from its housing without disconnecting the coolant inlet/outlet pipes, secure it to the mounting brackets for the bumper and the crossmember.

1. Remove the engine cooling radiator complete with fans from the mounting brackets.

1. Undo the nuts (1a) and remove the fans (1b) from the radiator.

Refitting ( Removing

) - Fit the fans on the radiator and secure them using the nuts.- Place the engine coolant radiator complete with fans in its housing.- Place the air conditioning condenser in its housing and secure it using the bolts.- Fit the air duct in its housing and secure it using the bolts.- Place the cold air intake back in its housing and tighten the lower bolt.- Connect the rapid connector for the radiator coolant inlet hose, radiator side.- Connect the rapid connector for the radiator coolant outlet hose, radiator side.- Connect the electrical connections for the dimmers.- Connect the electrical connections for the fans.- Place the fan motor heat shields in their housings and secure them using the nuts. Op. 0010T20 ENGINE COOLANT - CHANGE Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER Op. 7210E10 R.R. FRONT BUMPER Op. 1016A10 SOUND-PROOFING COVER - R.R