1. Undo the bolt (1a) fixing the three-way connector between the radiator and the thermostat (1b) and disconnect it from the thermostat.- Remove the O-ring from the three-way connector between the radiator and the thermostat.
1. Undo the bolts (1a) and remove the thermostat (1b) from its housing and from the heater rigid water supply pipe (1c).- Remove the gasket.
Refitting
(
Removing
)
- Place the thermostat complete with a new gasket back in its housing and tighten the bolts to the recommended torque.
Component
Fastening
dia
Value (daNm)
Validity
Thermostat
Bolt
-
1.0
3.2 JTS
- Connect the three-way connector between the radiator and the thermostat to the thermostat complete with a new O-ring and secure it using the bolt.- Tighten the bolt fixing the bracket for the three-way connector between the radiator and the thermostat . Op. 0010T20 ENGINE COOLANT - CHANGE
Removing
(
Refitting
)
Op. 0010T20 ENGINE COOLANT - CHANGE 1. Undo the bolt (1a) fixing the bracket (1b) for the three-way connector between the radiator and the thermostat (1c).
