939003621 - J040 REAR VIEW MIRROR ELECTRICAL ADJUSTMENT DOES NOT WORK

The exterior mirrors do not move when the control is operated.
The left mirror is adjusted by the Driver''s Door Node using information from the joystick on the door handle, the right mirror is aadjusted by the Passenger Door Node using information from the joystick on the driver''s door hand. The information from the joystick is sent from the Driver''s Door Node to the Passenger Door Node.
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Connect the Examiner diagnostic equipment to the diagnostic connect and check the following at the Driver''s Door Node:In errors ambient

  • that there are no faults
In parameters ambient

  • the plausibility of the parameters for joystick (left/right/up/down).
Move on to Step 31. Presence of faults1. Continue following the instructions for the diagnostic equipment.
2. Mirror selector joystick parameters (left/right/up/down) not plausible.2. Move on to Step 2.
2MIRROR ADJUSTMENT JOYSTICK OPERATION CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Remove the control panel following the,Op. 7005R40 REAR VIEW MIRROR-S AND DOOR MIRROR-S POSITIONING SWITCH UNIT - R.R.on the driver''s door side disconnect the connector and check the operation of the joystick following theOp. 7005RA CHECK ON OPERATION OF DOOR MIRROS ADJUSTMENT/FOLDINGMove on to Step 3Mirror control joystick faultyReplace the external mirrors control joystickOp. 7005R40 REAR VIEW MIRROR-S AND DOOR MIRROR-S POSITIONING SWITCH UNIT - R.R.
3CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present.End of diagnosisThe adjustment fault persists.Replace the Driver''s Door Node    Op. 5505A42 CONTROL UNIT (DIGITAL NETWORK NODE) IN DRIVER'S DOOR - R.R.