939003660 - K080 AIRBAG FAILURE WARNING LIGHT ON

N.B: The airbag fault warning light is turned on by a command sent by the Air Bag Node to the B-CAN network and then on to the Instrument Panel Node.
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Use an Examiner to check for system/component faults in the AIR BAG NODEMove on to Step 2System/components faultyContinue following the instructions for the diagnostic equipment
2CHECK AIR BAG WIRINGALL OKPROBLEMS ENCOUNTEREDACTION
Check the comb connector is correctly inserted in the airbag control unitMove on to Step 3Comb connector disconnectedInsert comb connector correctly
3ACTIVE DIAGNOSIS CHECKALL OKPROBLEMS ENCOUNTEREDACTION
With the Examiner in Instrument Panel Node mode, check that the air bag warning light is correctly activated in Active Diagnosis.Move on to Step 41.The Air Bag warning light does not operate correctly1.Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
2.The warning light operates correctly2. Replace the Air Bag control unit    Op. 5580C14 AIR BAG ECU - R+R
4CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer presentEnd of diagnosisReplace Body ComputerReplace Body Computer    Op. 5505A32 BODY COMPUTER - R.R