939004923 - 5540C42 SENSOR FOR CORRECTING/ALIGNING GAS DISCHARGE LIGHTING UNITS ON FRONT SUSPENSION - R R

Removing ( Refitting )     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. 1. Disconnect the electrical connection.
DescriptionComponent
FRONT HEADLAMP ALIGNMENT CORRECTER POTENTIOMETER (CAF)    See K001 HEADLAMP ALIGNMENT CORRECTOR FRONT POTENTIOMETER (CAF)
2. Undo nut (2a) connecting the unit to rod (2b).3. Loosen the support (3b) fixing bolts (3a).4. Remove the sensor and support.5. If necessary, undo the bolts (5a) and separate the sensor (5b) from the support.
Refitting ( Removing ) - Check that the sensor is not damaged.- If separated, position the sensor on the support and tighten the bolts.- Position the sensor and support and tighten the bolts.- Tighten the rod connection nut.- Connect the electrical connection.
Reset the position of the headlamps using an Examiner or another diagnostic instrument.
    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R