939005570 - 7045M32 ELECTRONIC THERMOSTAT FOR HEATING CIRCUIT OF ONE FRONT SEAT, LH OR RH R R

Removing ( Refitting ) - Raise the seat until it is in the end of travel position.1. Disconnect the backrest trim links.
1. Release the rear part (1a) of the cushion trim from retainers (1b).2. Disconnect the electrical connection for the seat heating control unit.
DescriptionComponent
PASSENGER FRONT SEAT HEATER CONTROL UNIT    See M110 FRONT PASSENGER SEAT HEATER CONTROL UNIT
DRIVER''S FRONT SEAT HEATER CONTROL UNIT    See M170 DRIVER'S FRONT SEAT HEATER CONTROL UNIT
3. Move control unit (3a) in the arrowed direction, releasing from retainers (3b).
Refitting ( Removing ) - Check that the control unit is not damaged.- Position the control unit and attach the retainers.- Disconnect the electrical connection for the ABS control unit.- Connect the rear part of the cushion trim to the retainers.- Connect the backrest trim links.- Move the seat to an intermediate height.- Check that the heat pads operate properly.