939010807 - 3350E30 LATERAL ACCELERATION AND SLEWING SENSOR - R.R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.     Op. 7040L71 BOX ON TUNNEL REAR COATING - R R    Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R     Op. 7040L20 TUNNEL COVER - R.R 1. Disconnect the electrical connection from the lateral acceleration and yaw sensor.2. Unscrew nuts (2a) and remove the lateral acceleration and yaw sensor (2b). Refitting ( Removing ) - Refit the lateral acceleration and yaw sensor and secure with nuts.- Connect the electrical connection to the lateral acceleration and yaw sensor.    Op. 7040L20 TUNNEL COVER - R.R     Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R     Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 7040L71 BOX ON TUNNEL REAR COATING - R R    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. - Connect the negative battery terminal.- Calibrate the lateral acceleration and yaw sensor following the procedure indicated by the Examiner diagnostic station.