939010970 - 5505A14 SUPPLEMENTARY JUNCTION BOX IN LUGGAGE COMPARTMENT - R.R

Removing ( Refitting )     Op. 7040B20 BACK TRIM FOR LUGGAGE COMPARTMENT/LOAD PLATFORM - ARRANGE     Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R     Op. 7025B66 BOOT COMPARTMENT SEAL - R+R     Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R - Work on the left side of the luggage compartment.    Op. 7040B18 LOAD COMPARTMENT LOAD PLATFORM SIDE TRIM ONE LH OR RH - R.R 1. Undo the nuts.2. Disconnect the electrical connection.
DescriptionComponent
LUGGAGE COMPARMENT JUNCTION UNIT (CVB)    See B045 LUGGAGE COMPARTMENT JUNCTION UNIT (CVB)
3. Move aside the control unit and disconnect the wiring retainers from the vehicle to move the control unit into a position where it can be disconnected from the rear terminals.
1. Mark the reciprocal position of all terminals (1a) connected to the control unit (1b).2. Use the COPAT extractor set art. 530/S to disconnect the terminals (1a) from the control unit.3. Keep the control unit.
Refitting ( Removing ) - Check that the control unit is not damaged.- Use the COPAT extractor set art. 530/S to connect the terminals to the control unit in accordance with the layout defined during removal.- Connect the previously disconnected wiring retainers to the vehicle.1. Connect the electrical connection.2. Position control unit (2a) and tighten nuts (2b).
ComponentFasteningdia  Value (daNm)Validity
LUGGAGE COMPARTMENT JUNCTION UNITNutM60.7 ÷ 1.1
    Op. 7040B18 LOAD COMPARTMENT LOAD PLATFORM SIDE TRIM ONE LH OR RH - R.R     Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R     Op. 7025B66 BOOT COMPARTMENT SEAL - R+R     Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R     Op. 7040B20 BACK TRIM FOR LUGGAGE COMPARTMENT/LOAD PLATFORM - ARRANGE