939010983 - 5505B20 REAR DOOR WIRING (ONE) LEFT OR RIGHT - R.R WITH WATER GUARD OR FRAME DETACHED (High setup, Low setup)

Removing ( Refitting ) 1. Disconnect lock (1a) from retainers (1b).2. Disconnect the electrical connection.
DescriptionComponent
LEFT REAR DOOR LOCK GEARED MOTOR    See N055 LEFT REAR DOOR LOCK GEARED MOTOR
RIGHT REAR DOOR LOCK GEARED MOTOR    See N056 RIGHT REAR DOOR LOCK GEARED MOTOR
3. Prise bulkhead coupling seals (3a and 3b) from the chassis.4. Tilt the chassis and disconnect the electrical connections.
DescriptionComponent
LEFT REAR SPEAKER    See P030 LEFT REAR SPEAKER
RIGHT REAR SPEAKER    See P031 RIGHT REAR SPEAKER
5. Release the wiring retainers from the chassis.6. Recover the wiring by withdrawing from the upper part.
Refitting ( Removing ) - Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.- If necessary, carry out continuity tests.- Position the wiring and attach the retainers.- Fit the bulkhead coupling seals to the chassis.- Connect the electrical connections.- Connect the lock to the retainers. Removing ( Refitting ) 1. Disconnect lock (1a) from retainers (1b).2. Disconnect the electrical connection.
DescriptionComponent
LEFT REAR DOOR LOCK GEARED MOTOR    See N055 LEFT REAR DOOR LOCK GEARED MOTOR
RIGHT REAR DOOR LOCK GEARED MOTOR    See N056 RIGHT REAR DOOR LOCK GEARED MOTOR
3. Prise bulkhead coupling seals (3a and 3b) from the chassis.4. Tilt the chassis and disconnect the electrical connections (4a) and (4b).
DescriptionComponent
LEFT REAR SPEAKER    See P030 LEFT REAR SPEAKER
RIGHT REAR SPEAKER    See P031 RIGHT REAR SPEAKER
DescriptionComponent
DRIVER''S FRONT ELECTRIC WINDOW MOTOR    See N060 DRIVER'S FRONT ELECTRIC WINDOW MOTOR
PASSENGER SIDE FRONT ELECTRIC WINDOW MOTOR    See N061 RIGHT FRONT ELECTRIC WINDOW MOTOR
5. Release the wiring retainers from the chassis.6. Recover the wiring by withdrawing from the upper part.
Refitting ( Removing ) - Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.- If necessary, carry out continuity tests.- Position the wiring and attach the retainers.- Fit the bulkhead coupling seals to the chassis.- Connect the electrical connections.- Connect the lock to the retainers.