939004822 - 7030B10 SLIDING ROOF (ASSEMBLY) - R+R WITH ROOF PANEL REMOVED

Removing ( Refitting ) - If possible, close the sliding sun roof.1. Disconnect the electrical connection for the sun roof control unit.
DescriptionComponent
SUN ROOF COUPLING    See D045 SUN ROOF COUPLING
2. Disconnect the water drainage pipes on both sides of the vehicle.3. Undo the nuts (3a) and the bolts (3b) for the side brackets.4. Remove the brackets.5. Undo the sun roof retaining nuts.6. Undo the sun roof retaining bolts.7. Remove the sun roof.
Refitting ( Removing ) - Check that the sun roof components are not damaged.- Place the sun roof in position.- Tighten the nuts and the bolts securing the sun roof.- Place the side brackets in position and secure them using the nuts and bolts.- Connect the water drainage pipes.- Connect the electrical connection for the motor.- If necessary,    Op. 7030B17 SUN-ROOF GLASS - ALIGNMENT- Check that the sun roof is working properly.