939004925 - 5540C46 SENSOR FOR CORRECTING/ALIGNING GAS DISCHARGE LIGHTING UNITS ON REAR SUSPENSION - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Raise the vehicle.1. Working under the rear suspension, disconnect the electrical connection.

Description	Component
REAR HEADLAMP ALIGNMENT CORRECTER POTENTIOMETER (CAF)	See K002 HEADLAMP ALIGNMENT CORRECTOR REAR POTENTIOMETER (CAF)

2. Undo nut (2a) connecting the unit to rod (2b).3. Loosen the sensor bolts.4. Remove the sensor. Refitting ( Removing ) - Check that the sensor is not damaged.- Position the sensor and tighten the bolts.- Tighten the rod connection nut.- Connect the electrical connection.- Remove the vehicle from the lift.

Reset the position of the headlamps using an Examiner or another diagnostic instrument.