2. Undo the bolts (2a) fixing the siren support (2b).3. Remove the siren and support.4. If necessary, undo the nuts (4a) and separate the siren (4b) from the support (2b).
Refitting
(
Removing
)
- Check that the siren is not damaged.- If removed, position the siren on the support and tighten the nuts.- Position the siren and support.- Tighten the bolts.- Connect the electrical connection.- Close the bonnet.
Removing
(
Refitting
)
- Open the bonnet.1. Working behind the left front headlamp, disconnect the electrical connection.