939004932 - 7025A10 BONNET LID - ALIGNMENT

- Open the bonnet.1. Check that the self-adjusting buffers are working properly.Replace them if necessary.    Op. 7025A15 BONNET LID SELF-ADJUSTING BUFFERS - R.R.2. If necessary, adjust the position of the lock.    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR - If the adjustments indicated in the previous points are insufficient, adjust the position of the bonnet hinges as described below.1. Working from both sides of the vehicle, loosen the bonnet lid bolts and adjust the lid position using the slotted holes in the hinges.

The arrows indicate the possible movements.

After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
BONNET	Bolt	M8x20	2.2 ÷ 2.6

2. If necessary, working from both sides of the vehicle, loosen the lid bolts and adjust the lid position using the slotted holes in the hinges.

The arrows indicate the possible movements.

After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
BONNET HINGES	Bolt	M8x25	2.2 ÷ 2.6

3. If necessary. Adjust the hinge mounts as follows.    Op. 7210E22 R.R. WINDSCREEN BASE TRIM - Working from both sides of the vehicle, bolts attaching the hinges to the body and adjust the lid position using the slotted holes in the hinges.

The arrows indicate the possible movements.

After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
BONNET HINGE BRACKET	Bolt	M6	0.8 ÷ 1.0

- If necessary, adjust the position of the lock.    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR