|  |  |  |  |  | 
| 1 | CHECK TYRE WEAR | All OK | Problems encountered | Operation | 
|---|
|  | Check the tyre wear status.More specifically:- wear on outer edge;- wear on inner edge;- wear on tyre shoulder;- tread wear | Move on to Step 4 | Uniform wear on both sides: inflation pressure low | Make sure tyres are inflated to the correct pressure. If necessary, replace the tyres. | 
| Step wear on one side (outer or inner) | Move on to Step 2 | 
| Wear on outer edge: exterior smooth | Move on to Step 2 | 
| Tyre shoulder wear | The problem is due to the customer''s over-sporty driving style: If necessary, replace the tyres. | 
| Central tread wear: inflation pressure excessive | Make sure tyres are inflated to the correct pressure. If necessary, replace the tyres. | 
| Uniform wear on tread surface: compound quality | Replace the tyres. | 
| Tread wear. | Replace the tyres. | 
| 2 | CHECK FRONT WHEEL GEOMETRY | All OK | Problems encountered | Operation | 
|---|
|  | Check the front wheel geometry | Move on to Step 3 | Front wheel geometry not correct | Restore correct geometry    Op. 4450A10  FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES ADJUSTMENT IF NECESSARY  if necessary, replace the front tyres. | 
| 3 | REAR WHEEL GEOMETRY | All OK | Problems encountered | Operation | 
|---|
|  | Check the rear wheel geometry | Move on to Step 4 | Rear wheel geometry not correct | Restore correct geometry    Op. 4450A40  REAR WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT, INCLUDES ADJUSTMENT IF NECESSARY  if necessary, replace the rear tyres. | 
| 4 | SHOCK ABSORBER EFFICIENCY CHECK | All OK | Problems encountered | Operation | 
|---|
|  | Check the efficiency of the shock absorbers. | End of diagnosis | Front shock absorbers inefficient. | Replace the shock absorbers    Op. 4410A12  FRONT SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMANTLING/REASSEMBLY OF ASSEMBLY AT BENCH - R.R  If necessary, replace the front tyres. | 
| Rear shock absorbers inefficient. | Replace the shock absorbers    Op. 4420A12 REAR SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMENTLING/REBUILDING OF ASSEMBLY AT BENCH R R If necessary, replace the rear tyres. |