939005568 - 7045M22 HEATER PAD FOR FRONT SEAT CUSHION, LEFT OR RIGHT - R.R. FOLLOWING ELECTRICAL CIRCUIT CHECK
Removing
(
Refitting
)
Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 70 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045D21 FRONT SEAT CUSHION COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED- Separate the cushion cover from the upholstery.1. Remove heat pad (1a) by detatching its adhesive bands (1b) from the padding, then remove braid (1c) from opening (1d). | If working from the passenger side, take care not to damage the passenger presence sensor. |
Refitting
(
Removing
)
- Check that the heater pad is not damaged.- If the heater pad detached previously is being reused, apply spray glue for plastics to the adhesive bands.- If a new heater pad is being used, remove the protective film from the adhesive bands.- Insert the wiring for the heater pad in the opening.- Place the heater pad in position centering it in the upholstery splining. | Take care not to damage the passenger presence sensor. |