939005571 - 7045J30 FRONT SEAT LIFTING MOTOR, LEFT OR RIGHT - R.R. FOLLOWING ELECTRICAL WIRING CHECK (Electric seats)

Removing ( Refitting ) - Raise the seat until it is in the end of travel position.    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. 1. Tighten the bolt (1a) securing the seat belt anchorage link (1b).2. Release seat belt anchorage link (1b) from retainer (2a), then move.
1. Disconnect the electrical connection.
DescriptionComponent
LEFT FRONT SEAT REAR HEIGHT ADJUSTMENT MOTOR    See N125 LEFT FRONT SEAT REAR HEIGHT ADJUSTMENT MOTOR
PASSENGER SIDE SEAT RAISING MOTOR    See N128 PASSENGER SEAT LIFT MOTOR
2. Release the circlip.3. Remove the pin.4. Undo the bolt.5. Remove the motor with arm.
Refitting ( Removing ) - Check that the motor and arm are not damaged.1. Check that arm (1a) is fully tightened on motor (1b) as shown in the figure (required to facilitate installation).
- Position the motor with arm.- Tighten the bolt.- Insert the pin and fit the retaining ring.- Connect the electrical connection.- Position the seat belt anchorage link in its seat, then fit to the retainer and tighten the bolt.    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. - Check that the seat is working properly.