939010405 - 1008A42 POWER UNIT RIGID SUPPORT - GEARBOX SIDE - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R - Position a hydraulic jack underneath the gearbox.1. Undo the bolts fixing the gearbox side flexible mounting to the rigid support.- Lower the power unit as necessary.2. Undo the bolts (2a) and remove the power unit gearbox side rigid support (2b). Refitting ( Removing ) 1. Place the power unit gearbox side rigid support (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Gearbox side power unit rigid support	Bolt (to be replaced)	M12	(gearbox side) 6.3 - 7.7 + 45°

- Place the power unit back in its housing.2. Tighten the new bolts fixing the gearbox side flexible mounting to the rigid support to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Gearbox side support flexible mounting	Bolt (to be replaced)	M12	(support side) 6.3 - 7.7 + 45°

- Remove the hydraulic jack from under the engine crankcase sump.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R