939010406 - 1008A44 REAR RIGID MOUNT - R R

Removing ( Refitting ) - Position the vehicle on a lift. 1. Undo the bolts fixing the power unit lower reaction rod, engine crankcase sump side. 1. Undo the bolts fixing the power unit rear support flexible mounting, rigid support side. 1. Undo the bolts (1a) and remove the rigid power unit rear support (1b). Refitting ( Removing ) 1. Place the power unit rigid rear support (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Power unit rigid rear support	Bolt	M12	(gearbox side) 5.4 - 6.6

1. Tighten the bolts fixing the power unit rear support flexible mounting, rigid support side to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Power unit rigid rear support flexible mounting	Bolt	M10	(rigid support side) 5.4 - 6.6

1. Tighten the bolts fixing the power unit lower reaction rod, engine crankcase sump side to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Power unit lower reaction rod	Bolt	M10	(engine crankcase sump side) 5.4 - 6.6

- Remove the vehicle from the lift.