939010433 - 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 2710A14 RIGHT HAND DRIVE SHAFT WITH JOINTS - R+R     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 1048B14 AIR DELIVERY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE     Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED 1. Undo the bolts (1a) and remove the crankshaft oil seal front cover (1b) complete with oil seal (1c).- Recover the gasket. - Working at the bench, release and remove the crankshaft front oil seal cover.

Take care not to damage the oil seal seal during its removal.The oil seal removal operation is destructive.The seal must therefore always be replaced.

Refitting ( Removing ) - Place the gasket back in its housing.1. Place the crankshaft front oil seal cover (1a) in its housing and secure it tightening the new bolts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Crankshaft oil seal front cover	Bolt (pretreated to be replaced)	M6	(engine block side) 0.8 - 1.0	1.9 JTD 16V2.4 JTD 20V

2. Fit a new crankshaft front cover oil seal (2a) in the housing using the tool (2b).

Tool	Description	Function	Validity
1871000500	Fitting tool	Fitting crankshaft front oil seal	1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V

    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED     Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1048B14 AIR DELIVERY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 2710A14 RIGHT HAND DRIVE SHAFT WITH JOINTS - R+R     Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R     Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R - Remove the vehicle from the lift.