939010434 - 1020D18 FRONT CRANKSHAFT COVER OIL SEAL - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED 1. Release and remove the crankshaft front oil seal cover.
Take care not to damage the oil seal seal during its removal.The oil seal is ruined during the removal operation so it must always be replaced.
Refitting ( Removing ) 1. Fit a new the crankshaft front cover oil seal (1a) in the housing using the tool (1b).
ToolDescriptionFunctionValidity
1871000500Fitting toolFitting crankshaft front oil seal1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V
    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R     Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R - Remove the vehicle from the lift.