939010437 - 1020D30 FLYWHEEL SIDE OIL SEAL COVER - R.R. AND REPLACE GASKETS WITH FLYWHEEL REMOVED
Removing
(
Refitting
)
1. Undo the bolts (1a), (1b) and remove the flywheel side oil seal cover (1c). | Cut the sealant between the flywheel side oil seal cover and the crankcase sump. |
Refitting
(
Removing
)
- Clean sealant residues off the flywheel side oil seal cover contact surface with the crankcase sump.- Apply silicone sealant to the contact surface between the crankcase sump and flywheel side oil seal cover.1. Place the flywheel side cover (1a) in its housing and secure it tightening the new bolts (1b) and bolts (1c) to the recommended torque. | When positioning the flywheel side oil seal cover, avoid significant sideways movements that could remove the sealant. |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Flywheel side oil seal cover | Bolt (pretreated to be replaced) | M6 | (engine block side) 0.8 - 1.0 | 1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine oil sump | Bolt | M6 | (front and rear cover side) 0.8 - 1.0 | 1.9 JTD 8V1.9 JTD 16V |
