939010567 - 1060G22 CAM ANGLE SENSOR - R.R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the electrical connection from the cam angle sensor.

	Description	Connector
1	Timing sensor	See K047 TIMING SENSOR

2. Undo the bolts (2a) and remove the cam angle sensor (2b). Refitting ( Removing ) 1. Position the cam angle sensor (1a) in its housing and secure it tightening the bolt (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Cam angle sensor	Bolt	M6	(cylinder head extension side) 0.8 - 1.0	1.9 JTD 16V2.4 JTD 20V

2. Connect the electrical connection to the cam angle sensor.     Op. 1016A10 SOUND-PROOFING COVER - R.R - Connect the negative battery terminal.