939010571 - 1060G50 THROTTLE BODY - R.R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1048B22 AIR SUPPLY HOSE FROM HEAT EXCHANGER TO INTAKE MANIFOLD - R + R1. Undo the bolts fixing the exhaust gas outlet hose from the E.G.R. solenoid valve, E.G.R. solenoid valve side.2. Undo the bolts (2a) and remove the throttle casing (2b) after having disconnected the electrical connection (2c).

	Description	Connector
2c	Integrated throttle casing actuator	See N075 THROTTLE BODY ACTUATOR

- Remove the gasket. - Working at the bench, undo the bolts and separate the throttle casing from the exhaust gas outlet hose from the E.G.R. solenoid valve. Refitting ( Removing ) - Assemble the throttle casing and the exhaust gas outlet hose from the E.G.R. solenoid valve and secure them using the bolts.- Place the gasket back in its housing.- Connect the electrical connection to the throttle casing, then place it back in its housing and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Throttle body	Bolt	-	(intake manifold side)	1.9 JTD 8v

- Tighten the bolts fixing the exhaust gas outlet hose from the E.G.R. solenoid valve, E.G.R. solenoid valve side.    Op. 1048B22 AIR SUPPLY HOSE FROM HEAT EXCHANGER TO INTAKE MANIFOLD - R + R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R