1064B42 SOLENOID CONTROLLING TURBOCHARGER VANE POSITION ACTUATOR - R.R - Alfa - 159 - eLearn

939010582 - 1064B42 SOLENOID CONTROLLING TURBOCHARGER VANE POSITION ACTUATOR - R.R

) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

1. Disconnect the electrical connection from the turbocharger vane actuator solenoid valve.

	Description	Connector
1	Turbine variable geometry control solenoid	See L036 TURBINE VARIABLE GEOMETRY CONTROL SOLENOID VALVE

2. Disconnect the vacuum pipes from the turbocharger vane position actuator control solenoid valve.3. Unscrew nuts (3a) and remove the turbocharger vane position actuator control solenoid valve (3b).

Refitting ( Removing

) - Refit the turbocharger vane position actuator control solenoid valve and secure with nuts.- Connect the vacuum pipes to the turbocharger vane position actuator control solenoid valve.- Connect the electrical connection to the turbocharger vane actuator solenoid valve.- Connect the negative battery terminal.