939010627 - 1080B83 EXHAUST GAS TEMPERATURE SENSOR ON PARTICULATE FILTER (D.P.F.) - R R

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

1. Disconnect the electrical connection for the exhaust gas temperature sensor on the particle filter.

	Description	Connector
1	Cat. downstream temperature sensor	See K188 CAT. DOWNSTREAM TEMPERATURE SENSOR

1. Undo the exhaust gas temperature sensor on the particle filter and remove it. Refitting ( Removing ) - Place the exhaust gas temperature sensor in its housing on the particle filter and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Exhaust gas temperature sensor on particle filter	-	M14	(D.P.F. particle filter side) 4.5	1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V

- Connect the electrical connection for the exhaust gas temperature sensor to the particle filter.- Connect the negative battery terminal.- Remove the vehicle from the lift.