939010635 - 1080C24 E.G.R. SYSTEM SOLENOID - R + R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the electrical connection from the EGR system solenoid valve

	Description	Connector
1	EGR solenoid valve	See L030 EGR SOLENOID VALVE

1. Undo the bolts fixing the exhaust gas outlet from the water/exhaust gas heat exchanger for the E.G.R. system, E.G.R. system solenoid valve side.2. Undo the fixing bolts (2a) and remove the E.G.R. system solenoid valve (2b).- Remove the gasket. Refitting ( Removing ) - Place the gasket back in its housing.1. Place the E.G.R. system solenoid valve (1a) in its housing and fasten it tightening the bolts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
E.G.R. system solenoid valve	Bolt	M8	(chamber side) 2.3 - 2.8	1.9 JTD 16V2.4 JTD 20V

2. Tighten the bolts fixing the exhaust gas outlet from the water/exhaust gas heat exchanger for the E.G.R. system, E.G.R. system solenoid valve side to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Exhaust gas/water heat exchanger for E.G.R. system	Bolt	M8	(EGR solenoid side) 2.3 - 2.8	1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V

- Connect the electrical connection to the EGR system solenoid valve    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 5530B10 BATTERY - R+R Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 1048B27     Op. 1060G50 THROTTLE BODY - R.R 1. Loosen the collar (1a) and disconnect the exhaust gas outlet hose from the exhaust gas/water heat exchanger for the E.G.R. system (1b), heat exchanger side.2. Disconnect the electrical connection from the EGR system solenoid valve

	Description	Connector
2	EGR solenoid valve	See L030 EGR SOLENOID VALVE

3. Undo the fixing bolts (3a) and remove the E.G.R. system solenoid valve (3b) complete with hose.- Remove the gasket. Refitting ( Removing ) - Place the gasket back in its housing.- Place the E.G.R. system solenoid valve in its housing complete with hose and fasten it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
E.G.R. system solenoid valve	Bolt	M8	(intake manifold side) 2.3 - 2.8	1.9 JTD 8v

- Connect the electrical connection for the E.G.R. solenoid valve.- Connect the exhaust gas outlet hose from the exhaust gas/water heat exchanger for the E.G.R. system, heat exchanger side and tighten the collar.    Op. 1060G50 THROTTLE BODY - R.R Op. 1048B27     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R