939010637 - 1080C83 EXHAUST GAS INLET PIPING FROM EXHAUST MANIFOLD TO HEAT EXCHANGER EGR - R R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 1088D14 UPPER RADIATOR COOLANT OUTLET HOSE - R.R. 1. Loosen the bands and remove the pipes from the return manifold to the water pump.
1. Loosen bolts (1a), loosen collar (1b) and remove the pipe (1c).2. Remove the relative seals.
Refitting ( Removing ) 1. Position the pipe (1a), complete with seal (1b), in its housing and secure it by tightening the collar (1c) and the bolts (1d) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Exhaust gas/water heat exchanger for E.G.R. systemBoltM8(exhaust manifold side) 2.3 - 2.81.9 JTD 8V1.9 JTD 16V2.4 JTD 20V
- Place the pipes from the return manifold to the water pump back in their housing and secure them with the relative bands.     Op. 1088D14 UPPER RADIATOR COOLANT OUTLET HOSE - R.R.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T20 ENGINE COOLANT - CHANGE