939010646 - 1084A40 ENGINE OIL LEVEL SENSOR - R + R

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Disconnect the electrical connection for the engine oil level sensor.

	Description	Connector
1	Engine oil level sensor	See K032 ENGINE OIL LEVEL SENSOR

2. Undo and remove the engine oil level sensor. Refitting ( Removing ) - Place the engine oil level sensor in its housing and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Engine oil level sensor	-	M12	(crankcase sump side) 2.3 - 2.8	1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V

- Connect the electrical connection to the engine oil level sensor.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Connect the negative battery terminal.- Remove the vehicle from the lift.