939010677 - 1088C40 THERMOSTAT- R + R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1048B22 AIR SUPPLY HOSE FROM HEAT EXCHANGER TO INTAKE MANIFOLD - R + R1. Undo the radiator coolant drain plug.
Collect the coolant in a suitable container.
1. Loosen the collar and disconnect the upper coolant input sleeve to the radiator, thermostat side.2. Undo the nut fixing the coolant return pipe from the engine oil heat exchanger.3. Loosen the collar and disconnect the coolant delivery pipe to the climate control system heater, thermostat side.4. Loosen the band and disconnect the coolant supply pipe to the engine oil heat exchanger, thermostat side.5. Disconnect the electrical connection from the engine coolant temperature sensor.
DescriptionConnector
5Engine coolant temperature sensor/sender unit    See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT
1. Disconnect the vacuum intake pipe faston connector from the vacuum pump.2. Loosen the band and disconnect the engine oil vapour recovery pipe from the engine oil filler.3. Loosen the band and disconnect the flexible pipe from the rigid coolant return pipe to the engine coolant reservoir.
1. Undo the bolts (1a) and remove the thermostat (1b) complete with O-ring (1c).
Refitting ( Removing ) 1. Place the thermostat (1a) in its housing with the O-ring (1b) and secure it by tightening the bolts (1c) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
ThermostatBoltM8(cylinder head side) 2.51.9 JTD 16V2.4 JTD 20V
- Connect the flexible pipe to the rigid coolant return pipe to the engine coolant reservoir and tighten the band.- Connect the engine oil vapour recovery pipe to the engine oil filler and tighten the band.- Connect the vacuum intake pipe faston connector to the vacuum pump.- Connect the electrical connection to the engine coolant temperature sensor.- Connect the coolant supply pipe to the engine oil heat exchanger, thermostat side, and tighten the band.- Connect the coolant delivery pipe to the climate control system heater, thermostat side, and tighten the band.- Tighten the nut fixing the coolant return pipe to the engine oil heat exchanger.- Connect the radiator upper coolant inlet hose, thermostat side, and tighten the band.- Tighten the coolant drain plug to the radiator.    Op. 1048B22 AIR SUPPLY HOSE FROM HEAT EXCHANGER TO INTAKE MANIFOLD - R + R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R - Remove the vehicle from the lift.