939010718 - 1820B48 SUPPLY HOSE TO OPERATING CYLINDER - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Raise the clip (1a) and disconnect the operating cylinder flexible supply pipe (1b), operating cylinder side.

Recover any brake-clutch fluid that emerges.

2. Undo the connector (2a) and remove the flexible supply pipe to the operating cylinder (2b). Refitting ( Removing ) - Place the flexible supply pipe to the operating in its housing, connect it to the rigid pipe and tighten the connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Flexible supply pipe to operating cylinder	Connector	M12	(Rigid pipe side) 1.7 - 1.9

- Connect the flexible pipe from the vibration damper to the operating cylinder, operating cylinder side and fasten it using the clip.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R