2110C50 GEAR SELECTION AND ENGAGEMENT UNIT - R R - Alfa - 159 - eLearn

939010737 - 2110C50 GEAR SELECTION AND ENGAGEMENT UNIT - R R

) Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 0010T20 ENGINE COOLANT - CHANGE - Loosen the band and disconnect the water supply pipe to the radiator, thermostat state and move it aside.- Loosen the band and disconnect the two water pipes from the water-engine oil heat exchanger and move them aside.1. Disconnect the gear selector cable.2. Disconnect the gear engagement cable.

1. Undo the bolts (1a) and remove the gear selector/engagement assembly (1b).

Refitting ( Removing

) - Place the gear selector/engagement assembly inside the gearbox and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Gear selection and engagement assembly	Bolt	M8	2.0

- Connect the gear engagement/selector cables.- Connect the water pipes to the water-engine oil heat exchanger using the bands.- Connect the supply pipe to the radiator, thermostat side using the band. Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 0010T20 ENGINE COOLANT - CHANGE