939010742 - 2125C32 GEAR CONTROL LEVER MOUNT - R R
Removing
(
Refitting
)
Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. Op. 7040L71 BOX ON TUNNEL REAR COATING - R R Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R. Op. 7040L37 GEAR LEVER TRIM - R.R Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R Op. 7040L20 TUNNEL COVER - R.R Op. Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R. Op. 7040L74 TUNNEL TRIM SUPPORT BRACKET/MOUNT R R 1. Undo the clips (1a) to release the flexible gear selector and engagement rods (1b) from the gearbox manual control lever support.2. Undo the bolts (2a) and lift up the gearbox manual control lever support (2b) as necessary and disconnect the flexible gear selector and engagement rods (2c).3. Remove the gearbox manual control lever.
Refitting
(
Removing
)
- Connect the flexible gear selection and engagement rods, place the manual gear control lever support in its housing and tighten the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox manual control lever support | Bolt | M8 | (bodyshell side) 2.5 |