2710A14 RIGHT HAND DRIVE SHAFT WITH JOINTS - R+R - Alfa - 159 - eLearn

939010750 - 2710A14 RIGHT HAND DRIVE SHAFT WITH JOINTS - R+R

) - Position the vehicle on a lift. Op. 4450B04 RIGHT FRONT WHEEL - R.R 1. Remove the two stakings and undo the nut (1a) securing the front hub to the driveshaft using the tool (1b) for counter-torque.

Tool	Description	Function	Validity
1870815000	Counter-torque	Loosen/ tighten nut securing front driveshaft to wheel hub

1. Undo the nut fixing the steering rod to the right front steering knuckle.2. Disconnect the steering rod (2a) from the front steering knuckle using the tool (2b).

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from steering knuckle

1. Undo the nut securing the front suspension lower wishbones to the strut.2. Unscrew the bolt securing the lower fork connecting the front suspension damper to the lower wishbone.

1. Use the tool to move the driveshaft back from the wheel hub.

Tool	Description	Function	Validity
2000001600	Extractor	Retract driveshaft from front wheel hub

1. Loosen the bolts fixing the intermediate driveshaft to the mounting.2. Disconnect the intermediate driveshaft (2a) from the differential and remove it together with the right driveshaft (2b).

Refitting ( Removing

) - Lubricate the intermediate drive shaft and right drive shaft mating surfaces with transmission fluid.- Connect the intermediate driveshaft complete with right driveshaft to the differential.- Tighten the bolts fixing the intermdiate driveshaft to the mounting to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Intermediate driveshaft	Bolt	M6	(support side) 0.7 - 1.1

- Refit the right drive shaft in its seat on the wheel hub and secure by screwing in a new nut without tightening.1. Tighten the bolt securing the lower fork connecting the front suspension damper to the lower wishbone to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Lower fork connecting front suspension shock absorber to lower track control arm	Bolt (to be replaced)	M14	(lower track control arm side) 4.5 ÷ 5.5 + 90°

2. Tighten the nut securing the front suspension lower wishbones to the strut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Front suspension lower track control arm	Nut	M14	(strut side) 8.1 - 9.9

1. Tighten nut (1a) securing the right front drive shaft to the wheel hub using tool (1b) for countertorque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub	Nut	M24	(driveshaft side) see operation 4450C28

Tool	Description	Function	Validity
1870815000	Counter-torque	Loosen/ tighten nut securing front driveshaft to wheel hub

1. Make two stakings on the nut collar as illustrated in the diagram.

- Connect the steering links to the front steering knuckle and tighten the nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub	Nut	M24	(driveshaft side) see operation 4450C28

Op. 4450B04 RIGHT FRONT WHEEL - R.R - Remove the vehicle from the lift.