939010771 - 3340A30 RPM SENSOR (ONE) FOR ONE FRONT WHEEL, LEFT OR RIGHT - R.R.

Removing ( Refitting )

The following procedure describes the removing-refitting of the left front wheel rpm sensor, carry out the same operations for the right front wheel rpm sensor.

- Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. 1. Disconnect the electrical connection for the front wheel rpm sensor.

	Description	Connector
1	Left front wheel sensor for ABS	See K070 LEFT FRONT WHEEL SENSOR FOR ABS

1. Unscrew bolt (1a) and remove the left front wheel rpm sensor (1b). Refitting ( Removing ) 1. Position the left front engine rpm sensor (1a) in its housing and secure it tightening the bolt (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel rpm sensor	Bolt	M6	(steering knuckle side) 0.7 - 1.1

- Connect the electrical connection for the front wheel rpm sensor.    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R - Connect the negative battery terminal.- Remove the vehicle from the lift.