939010779 - 3340B52 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO A.B.S HYDRAULIC CONTROL UNIT - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R - Drain the brake-clutch fluid into a suitable container.- Mark the pipes on the A.B.S. control unit1. Undo the connectors (1a), (1b) and remove the pipes (1c). Refitting ( Removing ) - Position the pipes and secure the connectors to the A.B.S. control unit and to the brake pump tightening them to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10/M12	1.4 ÷ 1.8

    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR