939010781 - 3340B56 RIGID PIPE FROM HYDRAULIC CONTROL UNIT TO RIGHT FRONT BRAKE - R.R.
Removing
(
Refitting
)
Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R. - Position the vehicle on a lift.1. Open the clips retaining the rigid pipe from the hydraulic control unit to the right front brake.2. Open the clips retaining the fuel pipe and the fuel vapour pipe.
1. Undo the bolts (1a) and move the power assisted steering fluid reservoir (1b) aside complete with pipes.
1. Undo the connector (1a) and remove the rigid pipe from the hydraulic control unit to the right front brake (1b).
Refitting
(
Removing
)
- Position the rigid pipe from the hydraulic controlunit to the right front brake and connect it to the right front brake caliper flexible pipe tightening the connector to the recommended torque.
Component
Fastening
dia
Value (daNm)
Validity
Brake pipe connectors
Connector
M10/M12
1.4 ÷ 1.8
- Connect the rigid pipe from the hydraulic control unit to the right front brake to the retaining clips.- Fit the engine coolant reservoir in place and secure it using the bolts.- Remove the vehicle from the lift. Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.
Removing
(
Refitting
)
Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R. - Position the vehicle on a lift.1. Open the clips retaining the rigid pipe from the hydraulic control unit to the right front brake.2. Open the clips retaining the fuel pipe and the fuel vapour pipe.
