1. Undo the bolts (1a) and remove the handbrake cable from the rear suspension longitudinal arm (1b).
- Disconnect the connector connecting the rigid pipe with the flexible pipe to the brake caliper.- Release the rigid pipe from the fastening clips and remove it.Refitting
(
Removing
)
- Position the rigid pipe and secure it using the clips.- Connect the rigid pipe to the brake caliper flexible pipe and tighten the connector to the recommended torque.
Component
Fastening
dia
Value (daNm)
Validity
Brake pipe connectors
Connector
M10/M12
1.4 ÷ 1.8
- Fit the brackets for the handbrake cable to the rear suspension longitudinal arm and secure them using the bolts.- Connect the handbrake cable to the left rear caliper.- Connect the left rear rigid brake pipe intermediate connector to the recommended torque.
Removing
(
Refitting
)
Op. 1076B12 EXHAUST PIPE ASSEMBLY R R Op. 4450B06 LEFT REAR WHEEL - R.R - Raise the vehicle and disconnect the intermediate connector for the rigid pipe.1. Disconnect the handbrake cable from the left rear caliper.
