Removing
(
Refitting
)
Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the rapid connector for the vacuum intake pipe for the brake servo, vacuum pump side.2. Release the brake servo vacuum pipe from the fastenings.3. Withdraw the brake servo single-acting valve from the brake servo.4. Remove the vacuum pipe assembly for the brake servo.
Refitting
(
Removing
)
- Refit the brake servo vacuum pipe assembly in its seat.- Refit the brake servo single-acting valve in its seat on the brake servo.- Secure the brake servo vacuum pipe using the collars.- Connect the quick-release fitting for the brake servo vacuum intake pipe, vacuum pump side. Op. 1016A10 SOUND-PROOFING COVER - R.R
Removing
(
Refitting
)
Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the rapid connector for the vacuum intake pipe for the brake servo, vacuum pump side.2. Release the brake servo vacuum pipe from the fastenings.3. Withdraw the brake servo single-acting valve from the brake servo.4. Remove the vacuum pipe assembly for the brake servo.