939010845 - 4410C10 FRONT SUSPENSION ANTI-ROLL BAR - R+R - CHECK WHEEL GEOMETRY SEPARATELY

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 4450B12 FRONT WHEELS (TWO) - R+R     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 4410D10 FRONT SUSPENSION FRAME - R+R 1. Working at the bench, undo the bolts (1a) and remove the anti-roll bar (1b) with joints from the front suspension frame. 1. Position the anti-roll bar in a vice with protective jaws, then unscrew the nuts (1a) and remove the front anti-roll bar joints (1b). Refitting ( Removing ) 1. Place the front suspension anti-roll bar joints (1a) in their housings and secure them by tightening nuts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front suspension anti-roll bar joint - anti-roll bar side	Nut	M12	9.0 ÷ 11.0

1. Place the anti-roll bar (1a) in its housing in the front suspension frame and secure it by tightening the bolts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front suspension anti-roll bar	Front bolt	M8	2.2 ÷ 2.6

Component	Fastening	dia	Value (daNm)	Validity
Front suspension anti-roll bar	Rear bolt (to be replaced)	M12	7.2 ÷ 8.8 + 90°

    Op. 4410D10 FRONT SUSPENSION FRAME - R+R     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 4450B12 FRONT WHEELS (TWO) - R+R - Remove the vehicle from the lift.