939010846 - 4410C12 FRONT SUSPENSION ANTI ROLL BAR JOINT (END) (ONE), LH OR RH - R.R

Removing ( Refitting )

In the following procedure the removing-refitting of the left front suspension anti-roll bar joint is described, carry out the same operations for the right front suspension anti-roll bar joint.

- Position the vehicle on a lift.    Op. 4450B02 LEFT FRONT WHEEL - R.R 1. Undo the nuts (1a), (1b) and remove the front suspension anti-roll bar joint (1c).

Use a spanner on the facings on the joint for counter-torque.

Refitting ( Removing ) 1. Place the front suspension anti-roll bar joint in its housing and secure it tightening the nuts (1b) and (1c) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front suspension anti-roll bar joint - fork side	Nut	M12	7.2 ÷ 8.8

Component	Fastening	dia	Value (daNm)	Validity
Front suspension anti-roll bar joint - anti-roll bar side	Nut	M12	9.0 ÷ 11.0

    Op. 4450B02 LEFT FRONT WHEEL - R.R - Remove the vehicle from the lift.