5050A10 WINDSCREEN WASHER FLUID RESERVOIR (IN ENGINE COMPARTMENT) - R+R - Alfa - 159 - eLearn

939010943 - 5050A10 WINDSCREEN WASHER FLUID RESERVOIR (IN ENGINE COMPARTMENT) - R+R

) - Position the vehicle on a lift.- Open the bonnet.1. Undo the upper bolt (1a) fixing the windscreen washer fluid reservoir (1b).

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 5050A11 WINDSCREEN WASHER FLUID RESERVOIR SUPPORT - R. R.1. Disconnect the electrical connections (1a, 1b, 1c).

Description	Component
WINDSCREEN/REARSCREEN ELECTRIC WASHER PUMP MOTOR	See N022 WINDSCREEN WASHER/ REAR WINDOW WASHER PUMP MOTOR
HEADLAMP WASHER ELECTRIC PUMP MOTOR	See N025 HEADLAMP WASHER PUMP MOTOR
COMPARTMENT MOTOR	See K027 WINDSCREEN WASHER FLUID LEVEL SENSOR

2. Disconnect the supply pipe to the windscreen washer.3. Disconnect the supply pipe to the headlamp washer.4. Undo the bolts.5. Remove the windscreen-headlamp washer fluid reservoir.6. If necessary, remove the windscreen washer fluid pump, releasing it from the housing (press-fit).7. If necessary, remove the headlamp washer fluid pump, releasing it from the housing (press-fit).8. If necessary, remove the windscreen-headlamp washer fluid level sensor, releasing it from the housing (press-fit).

Refitting ( Removing

) - Check that the screen washer fluid reservoir is not damaged.- If removed, refit the screen washer fluid pump, fitting it in place.- If removed, refit the headlamp washer fluid pump, fitting it in place.1. If removed, refit the screen-headlamp washer fluid level sensor (1a), fitting it in place positioning the float (1b) towards the top.

- Position the windscreen washer fluid reservoir.- Tighten the bolts.- Connect the supply pipe to the headlamp washer.- Connect the supply pipe to the windscreen washer.- Connect the electrical connections. Op. 5050A11 WINDSCREEN WASHER FLUID RESERVOIR SUPPORT - R. R. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Tighten the upper bolt fixing the windscreen washer fluid reservoir.- Refill the windscreen washer fluid reservoir.- Test the operation of the systems involved.