939010976 - 5505C29 ENGINE COMPARTMENT AND A.B.S. BUILT-IN WIRING - R.R. WITH INTERFERING COMPONENTS REMOVED

Removing ( Refitting )
See the Wiring Diagrams section for accurate identification of the electrical connections.
1. Working on both sides of the vehicle, undo the nuts (1a) securing bulkhead coupling node (1b).
1. Disconnect all the electrical connections for the wiring.2. Release the wiring from the retainers and remove it.
Refitting ( Removing ) - Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.If necessary, carry out continuity tests.- Position the wiring and secure it using the various retainers.- Connect all the electrical connections for the wiring.- Working on both sides of the windscreen base, position the bulkhead coupling node, then tighten the nuts.