5505B50 BOOT WIRING - R R - Alfa - 159 - eLearn

939010982 - 5505B50 BOOT WIRING - R R

) Op. 7025B38 BOOT LID LOCK - R+R 1. Disconnect the electrical connections (1a, 1b).

Description	Component
LEFT REAR LIGHT CLUSTER (MOVING SECTION ON BOOT LID)	See F035 LEFT REAR LIGHT CLUSTER (MOVING SECTION ON BOOT LID)
RIGHT REAR LIGHT CLUSTER (MOVING SECTION ON BOOT LID)	See F036 RIGHT REAR LIGHT CLUSTER (MOVING SECTION ON BOOT LID)

2. Release the wiring retainers.3. Release the cable duct (3a) from the boot lid opening (3b).4. Extract the wiring (4a) from the boot lid passing through the opening (3b).

1. Release the cable duct (1a) from the body opening (1b).2. Undo the retaining studs using the special tool.

Tool	Description	Function	Validity
1823015000	Knife	Retainer removal

3. Undo the nut.4. Slightly lower the upper edge of the left boot trim.

1. Disconnect the electrical connection.

Description	Component
REAR/BOOT COUPLING	See D040 REAR/BOOT COUPLING

2. Withdraw the boot lid wiring from the body and recover.

Refitting ( Removing

) - Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.If necessary, carry out continuity tests.- Insert the wiring in the body.- Connect the electrical connection.- Position the upper edge of the left boot trim and secure with the retaining stud and nut.- Fit the bulkhead coupling through the hole in the body.- Reinsert the wiring into the boot lid.- Fit the bulkhead coupling to hole in the boot lid.- Connect the wiring retainers.- Connect the electrical connections. Op. 7025B38 BOOT LID LOCK - R+R - Check that the lights in the dismantled parts are working.