939011205 - 7025A18 L/H OR R/H BONNET LID HINGE (ONE) - R+R WITH LID REMOVED

Removing ( Refitting ) For the left and right sides    Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R     Op. 7025A64 ENGINE COMPARTMENT GASKET - R.R. For the left hinge, proceed as follows:    Op. 7210E22 R.R. WINDSCREEN BASE TRIM 1. Undo the bolts.2. Remove the left hinge.
For the right hinge, proceed as follows:1. Release the retaining buttons using the special tool.
ToolDescriptionFunctionValidity
1823015000KnifeRetainer removal
2. Remove the right half trim (2a) releasing the internal retainers (2b).
1. Undo the bolts.2. Remove the right hinge.
Refitting ( Removing ) For the left hinge, proceed as follows:- Check that the left hinge is not damaged.- Position the hinge.- Screw in the bolts without tightening them.- After refitting the bonnet lid, adjust the position.    Op. 7025A10 BONNET LID - ALIGNMENT     Op. 7210E22 R.R. WINDSCREEN BASE TRIM     Op. 7025A64 ENGINE COMPARTMENT GASKET - R.R.     Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R For the right hinge, proceed as follows:- Check that the right hinge is not damaged.- Position the hinge.- Screw in the bolts without tightening them.- After refitting the bonnet lid, adjust the position.    Op. 7025A10 BONNET LID - ALIGNMENT - Place the right trim in position and attach the inner retainers.- Do up the retaining studs.    Op. 7025A64 ENGINE COMPARTMENT GASKET - R.R.