939011207 - 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR

Removing ( Refitting ) - Open the bonnet.1. Undo the upper bolts fixing the front bumper. 1. Undo the lock retaining nuts.2. Move the catch (2a) slightly aside and disconnect retainers (2b) and (2c) from the operating cable (2d).3. Recover catch (2a) by moving the upper edge (3a) of the bumper slightly. Refitting ( Removing ) - Check that the lock is not damaged.- Slightly move the upper edge of the bumper and position the lock.- Connect the control cable to the lock retainers.- Screw in the lock nuts without tightening them.- Tighten the upper bolts fixing the front bumper.

Component	Fastening	dia	Value (daNm)	Validity
FRONT BUMPER	Bolt	M6x22	0.7 ÷ 1.1

1. Adjust the position of the lock.

The arrows indicate the possible movements.

- Tighten the lock nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
BONNET LID LOCK	Nut	M6	0.7 ÷ 1.1

- Check that the bonnet opens and closes properly.