7025A66 L/H OR R/H BONNET LID SUPPORT DAMPER (ONE) - R+R - Alfa - 159 - eLearn

939011209 - 7025A66 L/H OR R/H BONNET LID SUPPORT DAMPER (ONE) - R+R

) - Open the bonnet and support it appropriately.1. Using a screwdriver, release the retaining springs from both ends of the telescopic strut (without removing them).2. Remove the telescopic strut.3. Undo the ball pins, if necessary.

Refitting ( Removing

) - Check that the telescopic strut is not damaged.- If removed, retighten the ball pins.

Component	Fastening	dia	Value (daNm)	Validity
TELESCOPIC STRUT BALL JOINT			2.2 ÷ 2.6

- Refit the telescopic strut, press fitting the ends in the ball pins.- Fit the retaining springs.- Check the operation of the telescopic strut and ensure the boot lid is correctly supported.