7025B26 L/H OR R/H BOOT LID LIFT DEVICE (ONE) - R+R - Alfa - 159 - eLearn

939011217 - 7025B26 L/H OR R/H BOOT LID LIFT DEVICE (ONE) - R+R

) 1. Open the boot lid and support in a stable manner.2. Using a screwdriver, release the retaining springs from both ends of the lift device (without removing them).3. Remove the lifting device.4. Undo the ball pins, if necessary.

Refitting ( Removing

) - Check that the lifting device is not damaged.- If removed, retighten the ball pins.

Component	Fastening	dia	Value (daNm)	Validity
TELESCOPIC STRUT BALL JOINT			2.2 ÷ 2.6

- Refit the lifting device press-fitting the ends in the ball pins.- Fit the retaining springs.- Check the operation of the telescopic strut and ensure the boot lid is correctly supported.