939011223 - 7025C40 FUEL FILLER FLAP CONTROL MOTOR - R+R AND CHECK LOCK SUPPLY LINE

Removing ( Refitting )     Op. 7040B20 BACK TRIM FOR LUGGAGE COMPARTMENT/LOAD PLATFORM - ARRANGE     Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R     Op. 7025B66 BOOT COMPARTMENT SEAL - R+R     Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R     Op. 7040B18 LOAD COMPARTMENT LOAD PLATFORM SIDE TRIM ONE LH OR RH - R.R - Open the fuel filler cap access flap.1. Undo the motor fixing bolts.2. Undo the fuel filler.3. Gently extract the motor support. 1. Disconnect the electrical connection.

Description	Component
FUEL FLAP LOCK GEARED MOTOR	See N058 FUEL FILLER FLAP LOCK GEARED MOTOR

2. Keep the motor and support.- Retighten the fuel filler. 1. Undo the bolts.2. Separate the motor (2a) from the support (2b). Refitting ( Removing ) - Check that the motor is not damaged.- Position the motor on the support and tighten the bolts.- Connect the electrical connection.- Undo the fuel filler.- Place the support in position.- Tighten the bolts.- Retighten the fuel filler.- Close the fuel filler cap access flap.    Op. 7040B18 LOAD COMPARTMENT LOAD PLATFORM SIDE TRIM ONE LH OR RH - R.R     Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R     Op. 7025B66 BOOT COMPARTMENT SEAL - R+R     Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R     Op. 7040B20 BACK TRIM FOR LUGGAGE COMPARTMENT/LOAD PLATFORM - ARRANGE